OCTAVE V 110

Bảo hành : | Kho hàng : 1 chiếc
Giá bán : 149.711.500 /chiếc
OCTAVE V 110
OCTAVE V 110
OCTAVE V 110
OCTAVE V 110

V 110

The Octave V 110 integrated amplifier is a push-pull pentode design delivering 2 x 110 W RMS output power (into 4 ohm loads). As with all Octave models, all research and development (R&D) and production has been conducted exclusively in-house, and the amplifier is comprehensively safeguarded against user error and parts wear – including catastrophic power tube failure.

The V 110 is a new member of KT 120 based amplifiers containing our proprietary Amplifier Technology. Ultra Low Noise and precise regulated Power Supply voltages ensure stable operation independent of mains fluctuations and high frequency noise distortions of the mains voltage. The V 110 improves upon the V 70 SE predecessor, with upgrades made in the amplification stages as well as the power supply. Ultra-low leakage Tantalum electrolytic caps are now used instead of Aluminum electrolytic caps in the driver circuit.

The heater voltage of the driver tubes has been precisely stabilized to reduce hum and noise that would otherwise be caused by the heater system. The heater and the supply voltage are both controlled via the power management circuit. The stabilization of the heater and power supply voltages ensures the stable, drift free operation in the mains range of +/- 15%. Every output tube in the V 110 is protected against over-current and other tube problems caused by aging.

 
Basic Model   V 110 Line
Tube Complement  
4 x KT120
Design  
Aluminium silver or Aluminium black
Options  


Phono Input MC or MM
Black-Box and Super Black Box

Power Output 
2 x 110 Watt into 4 Ohm
 
invi
  Frequency Response  
5 Hz - 70 kHz @ 10 W - 0 / - 2 dB
 
invi
  Total Harmonic Distortion  
0.1% at 10W @ 4 ohms
 
invi
  Signal-to-Noise Ratio  
-110 dB / 90 W
 
invi
  Input Sensitivity  
220 mV
 
invi
  Minimum Speaker Impedance  
2 Ohm
 
invi
  Connections  

Inputs: 4 x Line Level Cinch (1x optional Phono)

1 x XLR Input

Outputs:1 x Rec

Pre-Out and Main-In

 
  Features  

ECO Mode, Bias Adjustment, Power Management

 
invi
 
invi
  General Facts      
invi
  Power Consumption 
160 Watt idle, 500 Watt @ full power
 
invi
  Weight  ca. 23 kg 
invi
  Standard Accessory  Power cord, 3 mm screwdriver, IR-Remote Control, Allen key for removing the cover, sparetube 
invi
  Main Fuse  230/240 V mains: 4 A slow-blow type H 
invi
Sản phẩm cùng loại với OCTAVE V 110
234.622.500
122.897.500
101.200.000
Nhập Email nhận bản tin khuyến mại