OCTAVE V40 SE

Bảo hành : 1 năm | Kho hàng : 1 chiếc
Giá bán : 101.200.000 /chiếc
OCTAVE V40 SE

The V 40 SE is a line level integrated amplifier with 2 x 40 W peak output power. He is a further development and direct descendant of the successful V 40 and V 50 amplifier models. His powerful, clear bass fundamentals and his captivating resolution in the high frequencies win much respect. His unique features lift the V 40 SE into the 21st Century, while his performance earned him the rare “Stereoplay Highlight” (issue 07-2009), a prestigious award bestowed by the German high-end audio magazine Stereoplay.

 

The V 40 SE output stage consists of two power pentodes (Type 6550) for each channel. Due to the BIAS Control and Monitoring System, the use of other pin-compatible output tubes is possible to match the amplifier to personal taste, or to benefit from new or improved tubes.

Like all OCTAVE Amps the, V 40 SE is based on the enhanced pentode configuration. This configuration ensures the absolute stability of the amplifier against the unstable impedance of the loudspeaker. Impedance mismatch is without consequence, and the V 40 SE is stable down to a 2 Ohm Load. An important contributor to this stability is the single impedance output transformer.

 

The V 40 SE is the perfect amp for speakers with an average efficiency rating.But not only is the low impedance capability an advantage, with his exceptional Signal-to-Noise ratio of –110dB / Full Power he is also an ideal partner for high efficiency loudspeakers.

 

 
Basic Model   V 40 SE Line
Tube Complement  
4 x 6550
Design  
Aluminium silver or Aluminium black
Options  

  Spezifications      
invi
  Power Output  
2 x 40 Watt into 4 Ohm
 
invi
  Frequency Response  
20 Hz – 70 kHz @ 40 W -1 / -3 dB
5 Hz – 70 kHz @ 10 W -0 / -2 dB
 
invi
  Total Harmonic Distortion  
< 0,1% @ 10 Watt into 4 Ohm
 
invi
  Signal-to-Noise Ratio  
-110 dB / 40 W
 
invi
  Noise / Ripple  
< 300 μV
 
invi
  Optimum Speaker Impedance  
3 – 16 Ohm
 
invi
  Minimum Speaker Impedance  
2 Ohm
 
invi
  No-load current  
28 mA - BIAS low, 34 mA - BIAS high
 
invi
  Connections  

Inputs: 4 x Line Level (Cinch)

Outputs:1 x Tape

Pre-Out and Main-In

 
  Features  

ECO Mode, Bias Adjustment, Power Management

 
  Configuration  

Push Pull Pentode Circuit
Negative Grid Voltage adjustable for each tube
with 3 turn Precision Regulators,
Wideband Output Transformers using Silicon steel PMZ Core,
single Impedance Output,
Optimum Load Impedance 3 - 10 Ohm
Nominal Speaker Impedance,
Effieciency greater than 85dB,
Amplifier remains stable with
No Load and Output short circuited

 
invi
 
  General Facts      
  Power Consumption  
350 W
 
  Weight   18,6 kg  
  Standard Accessory   Power Cord, 3 mm Screwdriver, IR-Remote Control  
  Main Fuse   230/240 V mains: 2,5 A slow-blow type H  
  Dimensions (in mm)
invi
bild
invi
invi

The V 40 SE is a line level integrated amplifier with 2 x 40 W peak output power. He is a further development and direct descendant of the successful V 40 and V 50 amplifier models. His powerful, clear bass fundamentals and his captivating resolution in the high frequencies win much respect. His unique features lift the V 40 SE into the 21st Century, while his performance earned him the rare “Stereoplay Highlight” (issue 07-2009), a prestigious award bestowed by the German high-end audio magazine Stereoplay.

 

The V 40 SE output stage consists of two power pentodes (Type 6550) for each channel. Due to the BIAS Control and Monitoring System, the use of other pin-compatible output tubes is possible to match the amplifier to personal taste, or to benefit from new or improved tubes.

Like all OCTAVE Amps the, V 40 SE is based on the enhanced pentode configuration. This configuration ensures the absolute stability of the amplifier against the unstable impedance of the loudspeaker. Impedance mismatch is without consequence, and the V 40 SE is stable down to a 2 Ohm Load. An important contributor to this stability is the single impedance output transformer.

 

The V 40 SE is the perfect amp for speakers with an average efficiency rating.But not only is the low impedance capability an advantage, with his exceptional Signal-to-Noise ratio of –110dB / Full Power he is also an ideal partner for high efficiency loudspeakers.

Sản phẩm cùng loại với OCTAVE V40 SE
149.711.500
234.622.500
122.897.500
Nhập Email nhận bản tin khuyến mại